Bildegalleri
Fluke i410 AC/DC strømtang 400 A
Til salgs
2 150 kr
Beskrivelse av varen
Tilstand: Pent brukt - I god stand
Fluke Current Clamp, 400A Maximum AC Current, 32mm Maximum Conductor Size
This current clamp is a battery-powered Hall-effect probe designed to extend multimeter capabilities for measuring AC and DC currents up to 400A. It provides a voltage-type output for use with standard meters and opens access to confined conductors with a large clamp jaw while meeting CAT III 600V safety requirements.
Features & Benefits
• 1 mV/A output enables straightforward meter readings
• ±3.5% current clamp accuracy ensures measurement consistency
• 1A to 400 A continuous range covers common industrial loads
• DC–3kHz frequency response supports varied signal types
• 60 h battery life for extended field use
• 1.6m cable with 4mm plug for flexible connections
**Applications**
• Suitable for in-situ HVAC current measurements on compressors and fans
• Ideal for electrical maintenance troubleshooting on distribution panels
• Used with multimeters for control-panel commissioning and servicing
• Can be used for fault-finding in automation and motor-drive installations
What conductor sizes can be accommodated by the clamp?
The jaw accepts conductors up to 32mm diameter so single insulated cables and small multi-core runs can be measured without disconnection.
How does the device Interface with a multimeter?
It delivers a voltage output proportional to current (1 mV per amp) via a 1.6m lead terminated with shrouded 4 mm plugs for direct plugging into most meters.
What environmental temperatures can it operate in?
It functions across an ambient range from -10°C to 50°C, suitable for most workshop and site conditions.
Inkludert Norgespakke med sporing og forskning.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Annonsens metadata
Sist endret: 21.10.2026 kl. 11:25 ・ FINN-kode: 479222653
