Bildegalleri
(1/2)
USB to TTL FT232RNL Industrial Raspbery Pi 5 debugger
Til salgs
239 kr
Frakt fra 55 kr + Trygg betaling 41 kr
Trygg handel med Fiks ferdig
Etter levering har du 24 timer til å se over varen. Hvis det er noe galt med varen, får du pengene dine tilbake.
Lag en pakke
Kjøp mer fra selgeren og betal bare én fraktkostnad.
Beskrivelse av varen
Tilstand: Helt ny - Uåpnet/med lapp
Type: Annet
Sendes + 79
Uåpnet eske
Passer til Raspberry Pi5 og annet
[] Industrial USB TO TTL (D) Serial Cable, Original FT232RNL Chip, Multi Protection Circuits, Multi Systems Support, With Separated 4pin Header + SH1.0 3PIN Connector, Suitable For Raspberry Pi 5 Serial Port Debugging
[] This is a USB TO TTL (D) converter, connecting the USB connector of the PC or other devices to the device with TTL logic level for data communication, for example, such as microcontrollers, sensors, etc.
[] Industrial USB TO TTL serial cable, adopts original FT232RNL chip, onboard power supply and signal indicators, supports 3.3V/5V voltage level switching, built in self-recovery fuse, ESD and IO protection diode circuits, etc. It is compact in size, suitable for serial port debugging of industrial equipments and can be directly connected to the Raspberry Pi 5.
【Features】
[] Adopts original FT232RNL chip, with stable high-speed communication, reliability, and better compatibility.
[] Built-in self-recovery fuse and ESD for over-current/over-voltage protection, counter-current proof, improving shock resistance.
[] Onboard IO protection, anti-surge design, with stable communication and safety.
[] Onboard TTL serial port 3.3V/5V level transilation circuit, for switching TTL communication level.
[] Onboard 3x LED indicator, for checking power and signal transmitting status.
[] Plastic case, sandblasting process, nice-looking and compact.
【Specifications】
[] PRODUCT CATEGORY : Industrial USB TO TTL serial cable
[] CHIP SCHEME : FTDI original FT232RNL
[] HOST PORT : USB
[] DATA RATE : 300bps ~ 3Mbps
[] DEVICE PORT : UART
[] USB PORT :
[] Connector: USB-A
[] Protection: self-recovery fuse, ESD protection
[] UART PORT :
[] Connector: separated 4pin female header + SH1.0 3PIN fool-proof connector
[] Protection: IO protection diode
[] INDICATOR :
[] PWR: power indicator, turns on when there is USB connection and voltage is detected
[] TXD: TX indicator, turns on while the USB port is sending data
[] RXD: RX indicator, turns on while the device port is sending data back
[] CABLE : Black, PVC sheath, total length 1m
【Onboard Original Chips】
[] Adopts Original FT232RNL Chips, Providing Better Stability And Compatibility
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Annonsens metadata
Sist endret: 19.10.2026 kl. 13:03 ・ FINN-kode: 479088419
