Bildegalleri
Suzuki GSX-R 1000 Trim Kammer
Til salgs
5 000 kr
Beskrivelse av varen
Tilstand: Godt brukt - Synlig brukt
Suzuki GSX-R1000 01/04
Kammer fra WebCam og justerbare kamdrev fra APE disse er demontert fra 2004 modell Dragracing mc som gikk best 1/8 mile 5,42 / 1/4 mile 8,51 på sugemotor
web nr 70-831 / 70-832 540/566
DU kan bruke orginale ventilfjører og stempler på disse
selges samlet for kr 5000,- inkl fri frakt i Norden
Installation Information
Upon installation of your WEB-CAM camshaft, check the following. These operations are very important to engine life, please follow instructions! If your cam is described as a bolt-in in the WEB-CAM catalog, you may skip 1-5 below.
Check piston to valve clearance. Provide the necessary clearance by removing material from the piston Minimum .050" intake, .080" exhaust.
Check valve to valve clearance. It may be necessary to remove material from the valves or sink valve seat height in head.
Check the valve spring retainer to valve guide clearance at maximum lift. Remove material from the top,of valve guides to provide a minimum of .030" clearance.
Check for valve spring coil bind at maximum valve lift. Clearance at every coil should be at least .015"
Be certain that cam and/or rocker arms rotate freely in head or block. Remove material from head,block, or rocker arms where necessary.
Engine and cam life depend on proper installation. New or reground followers should be used when installing WEB-CAM profiles. Apply the provided assembly lube to cam lobe and follower surfaces.
For proper break-in, after installation of a new camshaft, do not allow your engine to idle below 2000 RPM for the first 15 minutes of use.
webcamshafts.com
Suzuki GSXR 1000 DOHC 16v
Part #:
70-831 ; 70-832
Grind:
540/566
Intake
Exhaust
Valve Lash (Inch):
.006" - .008"
.008" - .010"
Cold
Valve Lift (Inch):
0.384
0.335
Valve Lift (mm):
9.75
8.51
Advertised Duration:
272°
264°
Duration @ 0.050":
248°
236°
Lobe Center:
106°
108°
= 107° Overall
Intake
Opens
18°
Before
TDC
Exhaust
Opens
46°
Before
BDC
Intake
Closes
50°
After
BDC
Exhaust
Closes
10°
After
TDC
Valve Timing Is Checked With Zero Valve Lash
@ 0.050 Inches Of Valve Lift.
Print Timing Card Information
Close Timing Card Information
Web Cam Inc.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Annonsens metadata
Sist endret: 10.9.2026 kl. 14:57 ・ FINN-kode: 476054380

