Bildegalleri
(1/4)
2stk JBL Control 29AV, 8 og horn, sort
Til salgs
10 000 kr
Frakt fra 229 kr + Trygg betaling 351 kr
Trygg handel med Fiks ferdig
Etter levering har du 24 timer til å se over varen. Hvis det er noe galt med varen, får du pengene dine tilbake.
Beskrivelse av varen
Tilstand: Helt ny - Uåpnet/med lapp
Merke: JBL
Selger 2stk JBL Control 29AV Sort
heilt nye i eske.
Skjermet høyttaler til bruk i kontrollrom, industriinstallasjoner og kan også brukes utendørs. Leveres i sort utførelse.
8 ohm eller inkludert 70/100V trafo
dem ligger i eskene enda så bilder er hentet ifra nett.
kan sendes mot porto
info:
https://www.jbl.com/on/demandware.static/-/Sites-masterCatalog_Harman/default/dwb2e703e0/pdfs/JBL_Control_29AV1_specsheet.pdf
https://evenstadmusikk.no/jbl/1019876/jbl-control-29av-8-og-horn--8ohm-70v-100v-dot--sort
General Specifications
Frequency Range (-10 dB)
37 Hz –18 kHz
Frequency Response (± 3 dB)
43 Hz – 15 kHz
100 Hr Power Capacity
300 Watts Continuous Program Power ; 150 Watts Continuous Pink Noise
Maximum SPL @ 1m
Short-Term = 118 dB; Long-Term = 112 dB
Nominal Sensitivity
90 dB, 1W @ 1 m (3.3 ft)
Nominal Coverage Angle
110° H x 85° V, rotatable
Directivity Factor (Q)
6.7, averaged 500 Hz to 16 kHz
Directivity Index (DI)
8.3 dB, averaged 500 Hz to 16 kHz
Nominal Impedance
8 ohms (THRU setting)
Minimum Impedance
6.3 ohms @ 230 Hz 3.3 ohms @ 4.1 kHz
Crossover Type
3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
Transformer Taps
Transformer Taps 8Ω nominal
70V = 110W, 55W, 28W & 14W ; 100V = 110W, 55W, & 28W ; Thru Position
Low Frequency Transducer
200 mm (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
High Frequency Transducer
25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
Included Accessories
1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench
Optional Accessories
MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket
Dimensions
Dimensions (H x W x D)
520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in)
Net Weight (ea)
12.2 kg (26.8 lbs)
Shipping Weight (ea)
14.0 kg (30.8 lbs)
Design
Enclosure Material
High impact polystyrene
Grille
Thermoset composite coated steel
Overload Protection
Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during extreme overload conditions.
Environmental
IEC 529 IP-X4 splashproof rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
Termination
Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm)
Safety Agency Rating
Transformer is listed per UL1876.
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 8.7.2026 kl. 22:58 ・ FINN-kode: 469313105
