Bildegalleri
(1/2)
Pinstripe MISO Line Isolator (DI)
Til salgs
1 900 kr
Frakt fra 69 kr + Trygg betaling 141 kr
Trygg handel med Fiks ferdig
Etter levering har du 24 timer til å se over varen. Hvis det er noe galt med varen, får du pengene dine tilbake.
Lag en pakke
Kjøp mer fra selgeren og betal bare én fraktkostnad.
Beskrivelse av varen
Tilstand: Helt ny - Uåpnet/med lapp
Helt ny/uåpnet line isolator fra Pinstripe Pedals selges. Jeg har en DISO (stereo) fra før som jeg har benyttet i årevis. Har tenkt på en ekstra mono-rigg (derav dette kjøpet), men jeg legger litt andre planer, og legger denne ut.
Fra Pinstripe:
What does it do?
Converts 1/4 inch (balanced or unbalanced) to XLR balanced output.
Protects from accidental phantom power damage.
Transformer isolation allows for ground lifting to kill hum.
1/4 inch thruput allows connection to powered monitor.
Acts as a patchbay eliminating the need to repatch the board between rehearsal and stage.
Keeps signal level high and tone intact.
For DSP Guitar Rigs…
If you are using DSP Amp simulation/effects/load boxes such as the Tonex / Boss IR-2/IR-200 / Strymon Iridium / Line 6 HX Stomp / Line 6 HX Effects / Headrush Gigboard and are interfacing them in a live situation, you shouldn’t be using a direct box (for impedance matching) but should be using a “line isolator”. These simulators have outputs on ¼ inch connectors and no way to ground lift in the event of ground loop noise. A line isolator won’t drop your signal level like a direct box will, but will maintain the line level while giving the ability to ground lift and eliminate ground loop noise when running your guitar signal to the main PA. In addition, transformer isolation insures that Phantom Power from the console never touches the outputs of your FX pedal which can cause damage or bad sound.
For Percussion Pads…
Most percussion pads (Roland SPD-S, SPD-SX, Alesis Samplepad, Yamaha DTX, etc.) have line outs on 1/4 inch connectors but no XLR. These don’t need the impedance matching of a DI that will also drop the level. Some units have notoriously weak outputs. A line isolator is the perfect device to use to keep the level high and clean but still allow for ground lift on a professional stage with dirty power or bad grounds.
Engineered for Pedalboards:
The MISO is a 1-channel line isolator box made to integrate with other guitar pedals. It can deliver pure, clean sounds in the studio and it has also passed the toughest test of touring life as well.
The ¼ inch input/thru and XLR output jacks are mounted on a powder coated, cast aluminum enclosure. A ground lift switch is mounted between the output connectors so that it is out of the way and won’t get bumped accidentally. The 1/4 inch thru allows you to quickly connect a regular guitar amp or powered speaker for monitoring on stage or checking patches before a gig without disconnecting or re-patching anything from your board.
Hand-Built with Top Quality Parts
The MISO is all about giving you a clean, clear signal all of the time. We build them one-at-a-time by hand using a US-made line transformer from Cinemag, high reliability all-metal connectors from Switchcraft and Neutrik and top-shelf sealed switches from Grayhill. It is backed up with a full 3-year warranty.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Annonsens metadata
Sist endret: 13.10.2026 kl. 00:18 ・ FINN-kode: 465026722
