Fiks ferdig
Bildegalleri
(1/7)
REL Stentor II aktiv håndlaget Limited Edition sub
Til salgs
19 900 kr
Be om at selgeren sender med Fiks ferdig! Det er trygt, raskt, og du får varen levert til adressen din. Les mer
Beskrivelse av varen
Tilstand: Pent brukt - I god stand
Merke: JBL
Detta er luksus sub for de som liker god High End class A lyd. Den høres ut som 15 18" men er rask stor rensponsiv 10". Jeg liker black speed metal og da trenger man rask sub. Star wars skyte eller skrekk filmer blir enda kulere også vs billig jbl etc sub.ø den ersattet.
200W The Stentor II reference subwoofer: 200 watt, high current, DC coupled internal amplifier, Super ARM™ loaded cabinet, redesigned 10″ Big Ten Volt driver.
The ABC's of an ARM'ed REL Acoustics
The Stentor (actually Stentor II, but from here on I shall refer to it only as Stentor) is the second model from the top of REL's line of
subwoofers. Only the monstrous Studio II (88kg/194lbs) is larger. The Stentor is a beast of a subwoofer, meaning it is rated to go below 20 Hz (- 6 dB at 15 Hz).
Though heavy, my first impressions of the Stentor was that it wasn't very large. Nor did it have an 18" or even a 15" driver. In fact, the Stentor has a high-excursion 10" driver. It is able to move large amounts of air because of the 200W rms (400W peak) MOSFET amplifier built-in. And to do this in a controlled manner, it uses what REL calls Acoustic Resistive Matrix (ARM) loading. This complex method is to have the loading cavities seen by the driver built successively smaller as they wind their way towards the small port. Along the way, there is also one special control cavity which is not explained by REL in the manual.
The powerful amplifier, high excursion driver, and ARM loading lead to better transient response at low frequencies, usually what most cheaper subs get wrong. It is often easy to play loud but not with finesse. REL's ABC or Active Bass Controller, is the circuitry incorporating the low-pass crossover used by the Stentor. It is adjustable with one Coarse and one Fine rotary switch with 4 positions each, enabling a large range of settings (16) between 25 Hz and 100 Hz.
Neutrik Speakon™ ABC high level input and high level balanced input for differential amps, dual RCA stereo low level inputs.
Separate volume controls for low and high level. Phase reversal switch. Freq response to 12 Hz. Glass top.
27.5″w x 23″h x 17.5″d. 133 lbs.
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 7.2.2026 kl. 13:51 ・ FINN-kode: 449947807
