Fiks ferdig
Bildegalleri
(1/5)
Open Smart ESP32 + Easy IO Shild for ESP32
Til salgs
150 kr
Be om at selgeren sender med Fiks ferdig! Det er trygt, raskt, og du får varen levert til adressen din. Les mer
Beskrivelse av varen
Tilstand: Helt ny - Uåpnet/med lapp
Open-Smart ESP32 Development Board
ESP32 WiFi Module Development Board
+ Easy IO Shield for ESP32
Sender + 73 med sporing!
This development board is based on the popular Expressive ESP32 module. It breaks out all the modules available pins to a convenient 0.1” pitch dual in-line format suitable for breadboarding or other formats of prototyping. It also includes an auto programming circuit (reset button must be pressed after upload to run sketch) which allows the module to be automatically programmed from a computer via its USB type C socket.
It is fully compatible with the Arduino IDE via the board manager feature (see forum here for instructions) and so can be programmed just like any other Arduino board.
What is the ESP32?
ESP32 is a single chip ARM based microcontroller which includes a 2.4 GHz Wi-Fi and Bluetooth-Compatible radio designed with ultra low power 40 nm technology. It is designed and optimised for low power performance, better RF performance, robustness, versatility, features and reliability, for a wide variety of applications, and different power profiles.
- USB-C Type C USB: supply power and update of firmware;
- Uart to TTL chip: CH340;
- Working voltage: 2.8 - 3.6V;
- Logic level: 3.3V;
- Working current: 120mA;
- CPU Frequency: 240M Hz;
- Flash size: 4M Bytes (32M bits);
- SRAM: 520k Bytes;
- Wireless Frequency: 2400M-2483.5M Hz;
- Antenna Type: Built-in PCB antenna is available.
- Wireless Network Mode: station / softAP / SoftAP + station.
- Wireless criteria: 802.11 b/g/n/e/i; Bluetooth-Compatible 4.2 (BR/EDR/BLE);
- Digital interface: UART/SPI/I2C/GPIO/PWM/ Analog INPUT / Analog OUTPUT;
Don't forget to set, Partition scheme, to Minimal SPIFFS:
(1.9 MB APP with OTA/190KB SPIFFS)
1x ESP32 Type C WiFi Module Bluetooth-Compatible Dual Core CPU Development Board
1x Easy IO Shield for ESP32 Easy-plug XH 2.54mm Socket Sensor Module Expansion Board
This ESP32 C board is compatible for Arduino IDE and Thonny Micro phython IDE.
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 11.11.2025 kl. 11:02 ・ FINN-kode: 421363583
