Fiks ferdig
Bildegalleri
(1/10)
Drivstoffpumper Walbro-Sytec-Facet-Autoracing & AP-racing bremsepumper GI BUD
Til salgs
Trygg handel med Fiks ferdig
Varen sendes til deg, og du har 24 timer til å inspisere den før pengene overføres til selgeren.
Beskrivelse av varen
Ubrukt og i esker.
GI BUD
- 5 stk AP-racing bremsepumper
- 1 stk Walbro bensinfilter
- 6 stk Walbro bensinpumper
- 4 stk Sytec bensinpumper
AP Racing CP2623 Master Cylinder With Short Body
Extra Short Body For Restricted Spaces
Large Range Of Bore Sizes
Metric Or UNF Pushrods
The CP2623 range of master cylinders from AP Racing feature forged aluminium bodies and an extra short body length (80mm), which makes them ideal for brake or clutch applications where space is restricted. The mounting flange is vertical and the mounting hole spacing is 2.25 inch (57mm).
The CP2623 range is available in large range of bore sizes to suit most applications. There is also a choice of pushrod length and thread (Metric or UNF).
Inlet port: 7/16 UNF
Outlet Port: 3/8 UNF
Bore Size .625 (5/8 Inch), .660 (2/3 Inch), .700 (7/10 Inch), .750 (3/4 Inch) - Extra Short Cut Off, .750 (3/4 Inch), .812 (13/16 Inch) - Extra Short Cut Off, .812 (13/16 Inch), .875 (7/8 Inch), .937 (15/16 Inch) - Extra Short Cut Off, .937 (15/16 Inch), 1.0 Inch, 14mm, 15mm, 16.8mm
Pushrod Length No Pushrod (Non-Captive Type), 115mm, 160mm, 65mm, 88mm
Pushrod Thread 5/16 Inch UNF, M8 x 1.25, No Pushrod (Non-Captive Type)
Brand AP Racing
MPN(s) CP2623-88NC, CP2623-88PRM115, CP2623-88PRM160, CP2623-88PRT115, CP2623-88PRT160, CP2623-89NC, CP2623-89PRM115, CP2623-89PRM160, CP2623-89PRT115, CP2623-89PRT160, CP2623-905NC, CP2623-905PRM088, CP2623-905PRM115, CP2623-905PRM160, CP2623-905PRT088, CP2623-905PRT115, CP2623-90NC, CP2623-90PRM065, CP2623-90PRM088, CP2623-90PRM115, CP2623-90PRM160, CP2623-90PRT115, CP2623-90PRT160, CP2623-91NC, CP2623-91PRM065, CP2623-91PRM088, CP2623-91PRM115, CP2623-91PRM160, CP2623-91PRT115, CP2623-91PRT160, CP2623-92NC, CP2623-92PRM065, CP2623-92PRM088, CP2623-92PRM115, CP2623-92PRM115E, CP2623-92PRM160, CP2623-92PRT115, CP2623-92PRT160, CP2623-93NC, CP2623-93PRM065, CP2623-93PRM088, CP2623-93PRM115, CP2623-93PRM115E, CP2623-93PRM160, CP2623-93PRT115, CP2623-93PRT160, CP2623-94NC, CP2623-94PRM088, CP2623-94PRM115, CP2623-94PRM160, CP2623-94PRT115, CP2623-94PRT160, CP2623-95NC, CP2623-95PRM065, CP2623-95PRM088, CP2623-95PRM115, CP2623-95PRM115E, CP2623-95PRM160, CP2623-95PRT115, CP2623-95PRT160, CP2623-96NC, CP2623-96PRM088, CP2623-96PRM115, CP2623-96PRM160, CP2623-96PRT115, CP2623-96PRT160
Sytec BULLET F1 JIC 6 FILTER (Blue)
SKU BULLETF1-B
Sytec High Flow Fuel Filters are designed for in line application. These filters have a flow capacity of 500 Ltr/Hr and are capable of handling up to 10 Bar pressure. These filters are designed for use in either a Pre or Post fuel pump format and in both carburettor (Low Pressure) or fuel injection (High Pressure) fuel systems.
Colours Red/Blue
Body Material:- Aluminium (Anodised)
Seal Material:- Viton
Inlet Union Size:- Jic 6
Outlet Union Size:- Jic 6
Main Body Internal Thread:- 1/4 NPT
Filter Material:- Paper (10 Micron)
Optional Filter Element:- Stainless Steel (55 Micron)
Mounting Clips:- Yes x 2
Fuel type:- Petrol E5, E10, Diesel
Flow (Max):- 500 Ltr/hr
Pressure (Max):- 10 Bar
Main Body Dimensions:- 110x50mm
Main Body Weight :- 150 gms
Walbro ITP116 Motorsport Fuel Pump Kit
Mitsubishi Evo 2-9
Part Number
ITP-116
Walbro 255lph motorsport fuel pump with filter pick-up, wiring harness with flying leads, hoses, clips and all fittings required for a complete and relatively straight forward motorsport upgrade installation. Some soldering or wiring skills are required during the installation and all care should be taken when fitting products in or near the vehicle's fuel tank, if you are at all unsure, see the help of a mechanic for professional help.
Fits all Mitsubishi EVO 2, 3, 4, 5, 6, 7, 8 & 9 models fitted with an OE original pump with the Part No: 196130-3290
Suitable for modified fast road, trackday and Motorsport use
Directly interchangeable with your OE original fitment fuel pump
Suitable for heavily modified cars with power outputs of upto 500bhp
Fitted with basic mechanical skills and tools, but ask for help if unsure
Bensinpumpe Walbro GST450
Bensinpumpe av høy kvalitet.
Walbro GST 450 -InTank- bensinpumpe
Flyt: 450L/h
3Bar: 420L/h
5Bar: 390L/h
Sikkerhetsventil: åpnes ved 7 bar
Etanol: Ja
Lengde: 130 mm
Diameter øverst: 39mm
Diameter nederst: 50mm
Inntak: 11mm
Uttak: 11mm
Pumpen passer også noen typer Volvo, Saab ,200SX, Impreza
(sjekk likevel at denne passer din bil, ombygning kan bli nødvendig).
Genuine Walbro TI Automotive GST400 In-Tank
Fuel Pump + Fitting Kit
Innovation At Its Finest
The F90000262 in-tank fuel pump is an award winning Dual Channel Single Stage (DCSS) high flow fuel pump manufactured by Walbro / TI Automotive. The design features the very latest in fluid pumping technology and the results are quite remarkable. This lightweight, small and quiet running pump is capable of supplying enough fuel up to a staggering 650hp!
Revolutionary Design
Unlike conventional pumps that use a traditional Gerotor (generated rotor) design, the F90000262 utilizes two parallel rows of turbine blades with a single impeller that helps to force fuel through at a rate like no other of a similar size.
With its winning design combination, overall results are improved hot fuel flow, minimal noise and an increase in efficiency by up to 20% over conventional Gerotor pumps. These pumps are manufactured in the USA to the highest of specifications, they're also used as original equipment (OE) in some of the worlds most recently produced, fastest supercars. A more than good enough reason for any serious power enthusiast wanting an upgrade.
Features
Designed for high performance engines
Removes the need for two large externally mounted fuel pumps on high power applications
Capable of supporting up to around 650hp
PACE Award winning Dual Channel Single Stage OE technology - All components are validated to OEM specifications
High-quality fitting kit included
Internal check valve (one way valve) prevent system pressure bleed down
High pressure relief valve helps to support supercharger and turbo applications
Excellent pump for applications requiring super high flow rates
Excellent hot flow performance
SPECIFICATIONS
Fittings In (mm): 11
Fittings Out (mm): 9
Lower Body Diameter: 50mm
Upper Body Diameter: 39mm
Length: 121mm
Pump: Walbro GST400
Voltage DC: 12v
Flow Ltr/Hr (Max): 510
Flow Ltr/Hr 3 Bar (44psi): 390
Flow Ltr/Hr 5 Bar (73psi): 285
Max Pressure (Bar): 7
The Walbro 400 LPH 'turbine style' in-tank High Pressure fuel pump is the latest in fuel pump technology. Designed to meet the fuel-hungry demands of modern turbocharging enthusiasts the Walbro 400lph High Pressure unit can flow close to the amount as dual in-tank pumps or large external pumps such as the Bosch 044, but in a small, convenient and surprisingly quiet package.
This pump is a great solution for high fuel requirement turbocharged cars >500hp and anyone looking to make big power and run high boost with a simple fuel system where the Walbro 255 won't suffice.
Fittings In (mm):- 11
Fittings Out (mm):- 9
Pump:- Ti Automotive (Walbro) GST400
Voltage DC:- 12
Pulse Width Modulation Compatible:- Yes
Flow Ltr/Hr (Max):- 510
Flow Ltr/Hr @ 3 Bar (44psi):- 390
Flow Ltr/Hr @ 5 Bar (73psi):- 285
Max Pressure (Bar):- 7.5
Length (mm):- 122
Diameter (mm):- 50 / 39
Weight (Kg):-0.388
Walbro Ti Automotive TCP020/2 255 LPH Fuel Injection Pump (0580464999 / 0580464005)
Ti Automotive TCP020/2 Competition Out-Tank Fuel Injection Pump (255 ltr/hr)
Product Code
TCP020/2
Applications
Cross Reference
Bosch 0580464999
Bosch 0580464005
Fittings In:-12mm
Fittings Out:-12x1.5 Bango Stub
Pump:-Walbro GSL392
Voltage:-12v
Flow Ltr/Hr (Max):- 348
Flow Ltr/Hr @ 3 Bar (44psi):-270
Flow Ltr/Hr @ 5 Bar (73psi):- 222
Location To Tank (Mtrs) 0.6
Thread Size:-10x1mm SFT
Length (mm):- 160
Diameter (mm):- 43
Weight (Kg):- 0.46
Flow Chart
Please ensure that a pre-filter such as our Bullet Filter is fitted prior to installation to prevent contamination.
More Information
Colour Silver
Fuel Petrol up to E10
Voltage 12v DC
Manufacturer Ti Automotive (Walbro)
External fuel pump Sytec HI OTP044. It is installed between the fuel tank and the rail.
Specifications:
Pump: P3044.1
Imput: 18x1.5 inner
Output: 12x1.5 Banjo with one-way valve
Voltage: 12V
Max flow: 378 l/hour
At 3 Bar: 318 l/hour
At 5 Bar: 258 l/hour
Max pressure: 10,4 Bar
Max distance from the tank: 0,6m
Length: 194mm
Average: 60mm
Weight: 1,03 Kg
The anti-vibration sleeve on the pump is not included in the package.
Before installing the pump, we recommend installing a fuel filter to avoid damaging the pump with dirt from the fuel.
Suitable as a substitute for BOSCH Pump: 0580254044
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 27.9.2025 kl. 13:39 ・ FINN-kode: 418646702
