Bildegalleri
(1/2)
Wes Audio Titan NG 500 Recall Chassis
Til salgs9 995 kr
Tilstand: Helt ny - Uåpnet/med lapp
Wes Audio _Titan NG 500 Recall Chassis
_TITAN is complete recall system designed to provide total integration with your beloved analogue equipment. It extends 500 series connector with additional pins where modules can be designed to support digital recall or any other vendor specific functionalities. This extension is part of new open standard ng500 Next Generation 500 series which allows other manufacturers to design and implement digitally controlled analog devices.
We are proud to present _TITAN Future of analog processors.
HIGH END LINEAR POWER SUPLY
Linear power supply capable to deliver 5A of power will bring sound of your units to the next level!
10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*)
_TITAN can host standarized 500 series module (Please read Important Note below).
Of course it was designed to recall up to 10 units with signle USB or Ethernet connection!
CONTROL ALL MODULES THROUGH ONE CONNECTION!
_TITAN allows to control/recall all hosted modules through one connection:
1) USB for direct connection with your workstation.
2) Ethernet dedicated LAN connection to access all devices in your local network.
REMOTELY CONTROLED STEREO LINKS
_TITAN provides simple standalone application to change status of stereo links between modules.
No more problems with accessing your chassis configuration!
IAC INTERNAL AUDIO CONNECTOR
At slot number 10, _TITAN implements special connector, which routes all audio signals from and to, slots 1 8.
This allows future integration with audio interface modules, analog summing modules or patchbays.
INPUT source for any slot is implemented through analog relays, and it is configurable through standalone application. This prevents two different signal sources to be routed to the same module.
Features summary:
10 SLOTS FOR 500-SERIES or ng500-SERIES MODULES(*),
HIGH END LINEAR POWER SUPLY capable to deliver 5A of power,
CONTROL/RECALL ALL MODULES THROUGH ONE CONNECTION,
OPEN SPECIFICATION (**)
REMOTELY CONTROLED STEREO LINKS through standalone application,
IAC INTERNAL AUDIO CONNECTOR for future integration with audio interface, summing modules or patchbays,
Other features:
Stereo links are integrated with modules, and pressing Link button on modules which supports GCon protocol (e.g. _Mimas) sets stereo link on the _Titan.
Remote firmware upgrade _Titan & all modules inside can be upgraded remotely through USB or Ethernet connection.
XLR sockets in/out for each slot.
Internal stereo link switches which can be also managed through GConManager standalone application.
Power mode switch 115V/230V.
_CALYPSO is an audio interface designed to work in 500 series enclosure. It features state of art 8 channels of AD/DA conversion and perfectly integrates with ng500 chassis _TITAN, through I.A.C. connector. Besides its very convenient integration with ng500 chassis, it still can be used in standard 500 series enclosure using two DB25 connectors.
Standard 500 chassis support!
_CALYPSO is designed to work with standard 500 series enclosures, in that case DB-25 connectors on the front panel can be used to route audio signal to and from chassis.
DB-25 connectors can be also used to route audio signal from and to outboard gear!
Convinient Plug-in for I.A.C. recall and more!
Tilleggstjenester
Sist endret: 11.10.2026 kl. 16:23 ・ FINN-kode: 377977782
Mer fra Matrix Pro Audio
