Fiks ferdig
Bildegalleri
(1/5)
Raspberry Pi CM4 4/8gb ram/lagring med industriell carrier board-sett av to
Solgt
Til salgs
1 000 kr
Beskrivelse av varen
Tilstand: Helt ny - Uåpnet/med lapp
Sett av to - Raspberry Pi CM4 compute moduler (4gb ram, 8gb lagring) inkludert to stk industriell carrier board (produsert av Chipsee), noe som gjør at denne inkluderer betydelig flere IO porter enn en vanlig Raspberry Pi. Inkluderer heatsink.
Pris er per sett av 2 (2 CM4 og 2 carrier boards). Det er ca. 19 sett tilgjengelig - send melding om du ønsker å kjøpe flere sett.
***CM4 modul (CM4104008)***
CM4104008 is a Raspberry Pi Compute Module 4 (CM4) which is System on Module (SoM) containing processor, memory, eMMC Flash and supporting power circuitry. This module allows a designer to leverage Raspberry Pi HW and SW stack in their own custom systems and form factors. In addition, module has extra IO interfaces over and above what is available on Raspberry Pi boards, opening up more options for designer. The design of CM4 is loosely based on Raspberry Pi 4 Model B, and for cost-sensitive applications. While previous generations of Compute Module have all shared same DDR2-SODIMM-mechanically-compatible form factor, new CM4 is different. The electrical interface of CM4 is via two 100-pin high density connectors, and the new physical form factor has a smaller footprint overall when the connectors are taken into account. It features a wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless, Bluetooth 5.0, BLE with onboard and external antenna options for connectivity.
Features
4GB RAM, 8GB eMMC storage and wireless connectivity
Broadcom BCM2711, quad core Cortex-A72 (ARM v8) 64-bit SoC at 1.5GHz
H.265 (HEVC) (upto 4Kp60 decode), H.264(upto 1080p60 decode, 1080p30 encode), OpenGL ES 3.0 graphics
Gigabit Ethernet PHY supporting IEEE 1588, 1 × PCIe 1-lane Host, Gen 2 (5Gbps)
1 × USB 2.0 port (high speed) and 2 × HDMI 2.0 ports (up to 4Kp60 supported), 1 × SDIO 2.0 (CM4Lite)
28 × GPIO supporting either 1.8V or 3.3V signalling and peripheral options
5x UART, 5x I2C, 5X SPI, 1x SDIO interface, 1x DPI (parallel RGB display), 1xPCM, 2×PWM, 3×GPCLK O/P
MIPI DSI: 1 × 2-lane MIPI DSI display port and 1 × 4-lane MIPI DSI display port
MIPI CSI-2: 1 × 2-lane MIPI CSI camera port and 1 × 4-lane MIPI CSI camera port
Single +5V PSU input and operating temperature range from -20°C to +85°C
***Chipsee Industriell Carrier Board***
Det er en tilpasset versjon av denne her, uten skjerm, proudsert av Chipsee på bestilling. https://chipsee.com/docs/PCs/Pi/A72/Manuals/Hardware/CS10600RA4070.html?srsltid=AfmBOopVhJY-tPwg83I5eXeeUng3Pq6lg_X-2-S4S9YS76R-shvUoSrH.
CPU: Raspberry Pi® CM4, CM4 Lite; Quad Cortex-A72 at 1.5GHz
Storage: Support for 2 x TF Card3
RAM: 4 GB, Based on CM4
eMMC: 8 GB, Based on CM4
USB: 2 x USB 2.0 Host, 1 x USB OTG
LAN: 1 x Giga LAN
Audio: 3.5mm Audio Out Connector, 2W Speaker Internal
Buzzer: Onboard Buzzer, driven by GPIO
RTC: Yes, High Accuracy RTC with Lithium Button Coin battery (lithium battery not included)
RS232: Default to 2 x RS232, up to 4 x RS232
RS485: Default to 2 x RS4851, these 2 x RS485 can be configured as 2 x RS232
CAN: 1 x CAN-BUS
GPIO: 8 Channels, 4 Input, 4 Output
WiFi/BT: Yes (on CM4)
ZIGBEE: No
HDMI: Yes
SATA II: Not Supported
3G/4G/LTE: Supported, not mounted by default
Camera: Yes, not mounted by default
Power Input: From 6V to 36V
Current: 420mA Max at 12V
Power Consumption: 5W Typical
Working Temperature: From 0°C to +60°C
OS: None
Dimensions: CS10600RA4070E: 190 × 107.8 × 27.7 mm; CS10600RA4070P: 206 x 135 x 30mm
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 13.11.2025 kl. 21:41 ・ FINN-kode: 430804640
