Bildegalleri
(1/2)
Justerbar proff kvalitetsbenk bare 1 igjen !
Til salgs7 500 kr
Beskrivelse
DIMENSIONS
146 x 69 x 127 cm
WEIGHT
47 kg
ADJUSTMENTS
Backrest 7 positions. Seat 2 positions.
STRUCTURE
110x52 mm Steel pipe, 3 mm thick as per UNE EN 10219, quality s-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process by 4-roller system to avoid deformation during the process, keeping its physical characteristics throughout the piece.
PAINTING PROCESS
3 layers of paint. Steel pickling and stabilized by immersion of the parts in different degreasing solutions to ensure a perfect and complete cleaning of the base material. Antioxidant primer to ensure adquate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy paint.
DESIGN PROCESS
Ergonomic and biomechanical study under our associated professional athletes.After a long design process; from the drawing of the sketch,prototypes making and tested by athletes our products are released to the market.
WELDING
Perimeter closing welding in structural points and union plates.
ASSEMBLY PROCESSES
10 mm plate-against Plate system, to avoid looseness and torsion in maximum effort areas.Ergonomic and biomechanical research optimized for every exercise.
SEAT AND BACK
Leather simile perspiration resistant,antibacterial and antiallergenic.Back pad,seat pad and rolls in foam 80 kg/m3 density that provides an optimum support for your training and a uniform contact.Resistant to deformation
146 x 69 x 127 cm
WEIGHT
47 kg
ADJUSTMENTS
Backrest 7 positions. Seat 2 positions.
STRUCTURE
110x52 mm Steel pipe, 3 mm thick as per UNE EN 10219, quality s-275-J0H. Enriched and optimized to maintain a constant section in the bending process, avoiding fragile areas with low breakage rate. Cold bending process by 4-roller system to avoid deformation during the process, keeping its physical characteristics throughout the piece.
PAINTING PROCESS
3 layers of paint. Steel pickling and stabilized by immersion of the parts in different degreasing solutions to ensure a perfect and complete cleaning of the base material. Antioxidant primer to ensure adquate isolation of internal oxidation and good paint adhesion. 2 final coats of epoxy paint.
DESIGN PROCESS
Ergonomic and biomechanical study under our associated professional athletes.After a long design process; from the drawing of the sketch,prototypes making and tested by athletes our products are released to the market.
WELDING
Perimeter closing welding in structural points and union plates.
ASSEMBLY PROCESSES
10 mm plate-against Plate system, to avoid looseness and torsion in maximum effort areas.Ergonomic and biomechanical research optimized for every exercise.
SEAT AND BACK
Leather simile perspiration resistant,antibacterial and antiallergenic.Back pad,seat pad and rolls in foam 80 kg/m3 density that provides an optimum support for your training and a uniform contact.Resistant to deformation
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Nøkkelinfo
- Tilstand
- Ny
Beliggenhet
FINN-kode | 75913276 |
---|---|
Sist endret | 6.4.2020, 14:01 |