Makita P-44046 216-delers sett i koffert

Makita 216 delers sett i koffert.

42 x HSS bor (4 x 1 mm, 4 x 1,5 mm, 5 x 2mm, 5 2,5 x, 5 x 3mm, 4 x 3,2 mm, 4 3,5 mm x, 5 x 4mm, en 4.5mm x, 1 x 5mm, en 5.5mm x, 1 x 6mm, 1 x 6.5mm, 1 x 7mm, en 7.5mm x, 1 x 8mm, 1 x 9mm, 1 x 10mm.
11 x Masonry Bits (3, 4, 4,5, 5, 5,5, 6, 6.5, 7, 8, 9, 10 mm).
2 x 300mm lange Mur Bits (8, 10mm).
8 x Brad Point Bits (2 4mm x, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm).
5 x Flat Wood Bits (10, 12, 16, 20, 22mm).
2 x 300mm lang, flat Wood Bits (12, 14mm).
N 52 x 50mm bits: 8 x Pozi: (2 PZ0 x 2 PZ1 x 2 PZ2 x 2 x PZ3), 13 x Philips Bits (3 PH0 x, 3 PH1 x, 4 PH2 x, 3 x PH3) ; 8 x Torx (T10, T15, T20, T25, T27, T30, T40, T45), 17 Slotted (2 x 3mm, tre 4mm x, 3 x 5mm, 3 x 6mm, 3 x 7mm, 3 x 8mm). 6 x Hex (3, 4, 5, 6, 7, 8mm).
N 52 x 25mm bits: 13 x Slotted (2 x 3mm, to 4mm x, 2 x 5mm, 2 5.5mm x, 2 x 6mm, 2 x 7mm, 2 x 8mm). 13 x Philips (3 PH0 x, 3 PH1 x, 4 PH2 x, 3 x PH3). 7 x Pozi (PZ0, 2 PZ1 x 2 PZ2 x 2 x PZ3). 9 x Torx (T10, T15, T20, T25, T27, T30, T35, T40, T45). 6 x Hex (3, 4, 5, 6, 7, 8mm). 4 x Square (S1, 2, 3, 4).
20 x Nut drivere (5, 5,5, 6, 7, 8, 9, 10, 11, 12, 13mm + 5/32 ", 3/16", 7/32 ", 1/4", 9/32 ", 5/16 ", 11/32", 3/8 ", 7/16", 1/2 ".
3 x dybde målere (3, 5, 6mm).
1 x sekskantnøkkel 2.5mm
1 x forsenker
4 hullsager, svart finish (32, 38, 44, 54mm)
1 x holesaw arbor
3.5m målebåndet
1 x 8 "vater
1 x T-formet scredriver håndtak med magnetisk spiss
2 blyanter
1 x fleksibel kjøring
2 x spiker sett (1,5, 2,5)
1 x bit driver med magnetisk tupp, snap på håndtaket