Bildegalleri
Graveringsmatte
(1/1)
Seklema klebematte / Graveringsmatte / Multi-mat
Til salgs3 390 kr
Beskrivelse
Seklema klebematte / Graveringsmatte / Multi-mat, dim 61x61cm. Matten er tosidig, kan derfor brukes på begge sider. Sørger for at graveringmaterialet (plast, aluminium eller stålplater) ligger rolig under gravering. Kan sendes per postpakke for kr 160,00 eks mva. Pris for 1 stk matte dim 61x61cm er kr 3.390,- og må betales på forhånd (faktura eller Vipps). Alle priser er eks mva.
Info:
How long will Multi-Mat/Seklema Last?
The life span of Multi-Mat/Seklema depends on many factors , including type of use,( IE: engraving, profiling through material, or laser hold down), proper cleaning and handling . The average user can expect many months or even years of use. One great Multi-Mat/Seklema advantage is that it is double sided, thereby providing double the life span when compared to other single sided products.
What is the cleaning procedure for Multi-Mat/Seklema?
Cleaning Multi-Mat/Seklema is simple and easy. Merely use a soft sponge and running water to remove chips, dust or dirt, and then allow to dry. No chemicals cleaners are required.
How is Multi-Mat/Seklema affixed to the engraving table, and can it be removed?
Because Multi-Mat/Seklema is double sided, it holds itself to the engraving table top. No double stick tapes, vacuums, or clamps are necessary, and Multi-Mat/Seklema can be easily removed and stored, then reinstalled by placing it in position and gently pressing down. No other hold down system is so fast and easy to use.
Is there any clean up required after using Multi-Mat/Seklema?
For most situations the answer is no, however Multi-Mat/Seklema does leave a slight oily residue on some engraving plates. If you wish to use double stick tape as a plate mounting system, this residue can be easily removed with cloth and rubbing alcohol, or thedouble stick tape can be applied to the plate before engraving, and then used with Multi-Mat/Seklema.
What happens if I cut through the engraving material into Multi-Mat/Seklema, is it ruined?
Multi-Mat/Seklema has a self healing feature. Small cuts in the surface of Multi-Mat/Seklema should not cause problem, and seem to heal themselves. Of course continued cuts over a long period of time will degrade the effectiveness of Multi-Mat/Seklema. Many small enclosed cuts ( closed path such as a series of circles, or squares ) could cause sections of the mat to come out which of course would degrade its performance.
Multi-Mat/Seklema seems expensive, how can I justify paying that much?
Although Multi-Mat/Seklema will wear out eventually, it is not really a consumable item like double stick hold down tape or labor. Multi-Mat/Seklema makes life a lot easier for the engraver, and will pay itself very quickly in time saved and ease of use. When the cost of double stick hold down tape, along with the associated time and labor needed for application and removal is figured in, Multi-Mat/Seklema becomes even more cost effective.
Info:
How long will Multi-Mat/Seklema Last?
The life span of Multi-Mat/Seklema depends on many factors , including type of use,( IE: engraving, profiling through material, or laser hold down), proper cleaning and handling . The average user can expect many months or even years of use. One great Multi-Mat/Seklema advantage is that it is double sided, thereby providing double the life span when compared to other single sided products.
What is the cleaning procedure for Multi-Mat/Seklema?
Cleaning Multi-Mat/Seklema is simple and easy. Merely use a soft sponge and running water to remove chips, dust or dirt, and then allow to dry. No chemicals cleaners are required.
How is Multi-Mat/Seklema affixed to the engraving table, and can it be removed?
Because Multi-Mat/Seklema is double sided, it holds itself to the engraving table top. No double stick tapes, vacuums, or clamps are necessary, and Multi-Mat/Seklema can be easily removed and stored, then reinstalled by placing it in position and gently pressing down. No other hold down system is so fast and easy to use.
Is there any clean up required after using Multi-Mat/Seklema?
For most situations the answer is no, however Multi-Mat/Seklema does leave a slight oily residue on some engraving plates. If you wish to use double stick tape as a plate mounting system, this residue can be easily removed with cloth and rubbing alcohol, or thedouble stick tape can be applied to the plate before engraving, and then used with Multi-Mat/Seklema.
What happens if I cut through the engraving material into Multi-Mat/Seklema, is it ruined?
Multi-Mat/Seklema has a self healing feature. Small cuts in the surface of Multi-Mat/Seklema should not cause problem, and seem to heal themselves. Of course continued cuts over a long period of time will degrade the effectiveness of Multi-Mat/Seklema. Many small enclosed cuts ( closed path such as a series of circles, or squares ) could cause sections of the mat to come out which of course would degrade its performance.
Multi-Mat/Seklema seems expensive, how can I justify paying that much?
Although Multi-Mat/Seklema will wear out eventually, it is not really a consumable item like double stick hold down tape or labor. Multi-Mat/Seklema makes life a lot easier for the engraver, and will pay itself very quickly in time saved and ease of use. When the cost of double stick hold down tape, along with the associated time and labor needed for application and removal is figured in, Multi-Mat/Seklema becomes even more cost effective.
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Nøkkelinfo
- Tilstand
- Ny
Generell info
Varen kan hentes ved Midttun i Bergen, evnt avd kontor i Øygarden (ved Sartor, Teknologibygget), eller avd kontor i Oslo (Fjellhamar). Alternativt sender vi mot porto.
Betaling forskudd på Vipps eller faktura.
Betaling forskudd på Vipps eller faktura.
Beliggenhet
FINN-kode | 212387351 |
---|---|
Sist endret | 26.3.2021, 09:02 |