Bildegalleri
3990,- kr
(1/2)
Inaktiv
STAGES CYCLING POWER POWERMETER
Til salgs
Beskrivelse
STAGES CYCLING Power Meter L Shimano GRX RX810 172,5mm 3990,-kr
The Power Meter Stages L RX 810 is the first Gravel Bike specific power meter in the Stages range and was developed for the Shimano GRX group. The power meter is preassembled on a left Shimano FC-RX810 crank arm and, once the correct crank length has been selected, can be replaced extremely quickly and easily with the left crank arm of the existing crankset. A great advantage over other systems: there is no intervention in the tuning of the wheel and the gearshift.
In the L- (Left-) power meter all features from the current LR- (Left-Right) power meter have been integrated with power measurement on both sides. Not only the software, but also the hardware has been revised. The measuring accuracy could be increased to + -1.5%. The antenna has also become stronger and sends the data at 6 times higher intensity, which reduces the risk of dropouts. The L-Powermeter are also compatible with even more bike computers. The integrated cadence sensor was also upgraded to measure even more precise values. Optionally, the cadence can now also be measured using a magnet. As a positive side effect, the new hardware ensures a weight reduction of 5 grams compared to the previous version.
Active temperature compensation ensures that the Stages power meter is measured accurately, even with large temperature fluctuations. With the ANT + and Bluetooth Smart transmission standards, the Stages power meter is compatible with all ANT + -compatible bike computers and the latest smartphone models. Firmware upgrades can be carried out quickly and easily thanks to the wireless transmission to the power meter.
An integrated LED display visualizes the battery level and the calibration result even without aconnection to an app or the bike computer. To be prepared for bad weather, the Stages LR power meter is waterproof according to IPX7 standard (temporary immersion).
Technical specifications:
Power range: 0 to 2500 watts
Accuracy: +/- 1.5%
Cadence measurement: via acceleration sensor or magnet
Cadence range: 20-220 revolutions per minute
Battery life: 200+ hours (button cell CR2032, change possible without tools)
Waterproof: yes (IPX7; against temporary immersion)
Compatibility crank: Shimano GRX FC-RX810 cranks
axle type : Hollowtech II
Transmission: ANT +, Bluetooth Smart Ready
Software compatibility: Training Peaks, Strava, Garmin Training Center and others
Crank length: 172.5
Color: Black
Stages Cycling Power G3 L - Stages Carbon BB30 2500,-kr
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to a non-drive-side Stages Carbon crank arm, it is individually calibrated to ensure its accuracy. This particular Stages crank arm is built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust.
Reliable Readings In All Conditions
To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data.
Stable Connection
Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance.
Compatibility:
· Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold separately)
· Frame Compatibility: Most frames
· Device Compatibility: ANT+, Bluetooth Smart ready
· Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others
Stages Cycling spindles for 30mm are available in five options to purchase separately:
· For SRAM Red 22 BB30
· For SRAM Force 22, Rival 22, Force/Rival CX1
· For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer
· For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacer
· Race Face Next SL
The Power Meter Stages L RX 810 is the first Gravel Bike specific power meter in the Stages range and was developed for the Shimano GRX group. The power meter is preassembled on a left Shimano FC-RX810 crank arm and, once the correct crank length has been selected, can be replaced extremely quickly and easily with the left crank arm of the existing crankset. A great advantage over other systems: there is no intervention in the tuning of the wheel and the gearshift.
In the L- (Left-) power meter all features from the current LR- (Left-Right) power meter have been integrated with power measurement on both sides. Not only the software, but also the hardware has been revised. The measuring accuracy could be increased to + -1.5%. The antenna has also become stronger and sends the data at 6 times higher intensity, which reduces the risk of dropouts. The L-Powermeter are also compatible with even more bike computers. The integrated cadence sensor was also upgraded to measure even more precise values. Optionally, the cadence can now also be measured using a magnet. As a positive side effect, the new hardware ensures a weight reduction of 5 grams compared to the previous version.
Active temperature compensation ensures that the Stages power meter is measured accurately, even with large temperature fluctuations. With the ANT + and Bluetooth Smart transmission standards, the Stages power meter is compatible with all ANT + -compatible bike computers and the latest smartphone models. Firmware upgrades can be carried out quickly and easily thanks to the wireless transmission to the power meter.
An integrated LED display visualizes the battery level and the calibration result even without aconnection to an app or the bike computer. To be prepared for bad weather, the Stages LR power meter is waterproof according to IPX7 standard (temporary immersion).
Technical specifications:
Power range: 0 to 2500 watts
Accuracy: +/- 1.5%
Cadence measurement: via acceleration sensor or magnet
Cadence range: 20-220 revolutions per minute
Battery life: 200+ hours (button cell CR2032, change possible without tools)
Waterproof: yes (IPX7; against temporary immersion)
Compatibility crank: Shimano GRX FC-RX810 cranks
axle type : Hollowtech II
Transmission: ANT +, Bluetooth Smart Ready
Software compatibility: Training Peaks, Strava, Garmin Training Center and others
Crank length: 172.5
Color: Black
Stages Cycling Power G3 L - Stages Carbon BB30 2500,-kr
Building on what it learned with its Gen 2 Version, Stages has developed its technology even further for this latest model. Built on to a non-drive-side Stages Carbon crank arm, it is individually calibrated to ensure its accuracy. This particular Stages crank arm is built to retrofit SRAM, Race Face, and Easton cranks with Stages Power, with an additional spindle purchase. No additional spindle purchase is required for FSA 386EVO cranks. Stages produce power meters that both avid amateurs and professionals at the top of their game can trust.
Reliable Readings In All Conditions
To ensure consistency of measurement, Stages introduced a world-first feature to its power meters. This feature is called “Active temperature Compensation” and it is built in as standard to account for sudden temperature changes, which if not accounted for, would result in false and inaccurate data.
Stable Connection
Stages have made additional improvements to the Bluetooth and ANT+ transmitters and the accelerometer. This ensures a stable and powerful connection with your cycle computer is maintained and a faster sampling rate for more up-to-date feedback on your performance.
Compatibility:
· Fits 30mm spindle BB30, OSBB and 386EVO bottom bracket standards by way of appropriate Stages 30mm alloy spindles (sold separately)
· Frame Compatibility: Most frames
· Device Compatibility: ANT+, Bluetooth Smart ready
· Software Compatibility: StagesLink, Training Peaks, Strava, Garmin Training Centre and others
Stages Cycling spindles for 30mm are available in five options to purchase separately:
· For SRAM Red 22 BB30
· For SRAM Force 22, Rival 22, Force/Rival CX1
· For 2015 model/year or newer SRAM BB30 mountain cranks with a 9mm driveside spacer
· For 2015 model/year or newer SRAM BB30 mountain cranks with a 15.5mm driveside spacer
· Race Face Next SL
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Nøkkelinfo
- Tilstand
- Ny
Generell info
Er du i Oslo er du velkommen til å stikke innom oss på Hoffsveien 10A på Skøyen. Der kan du se alle våre modeller og tilsvarende komponenter.
Workshoppen er åpen 10-18, Mandag-Fredag og 10-15 på lørdager.
Workshoppen er åpen 10-18, Mandag-Fredag og 10-15 på lørdager.
Beliggenhet
Eff.rente 11,00 %. 120 000 o/5 år. Kostnad: 34 341 kr. Totalt 154 341 kr.
FINN-kode | 272890682 |
---|---|
Sist endret | 11.9.2023, 13:40 |