Bildegalleri
RESERVERT: Pro-Ject RPM 5.1
Beskrivelse av varen
Tilstand: Brukt
Type: Platespillere
RESERVERT:
Fin platespiller fra Pro-Ject selges for en kamerat. Fungerer som den skal og ser strøken ut.
Philips GP400 pickup med stift som spiller veldig fint følger med sammen med lokk i plast.
Original emballasje mangler, så henting er å foretrekke. Kan sendes på kjøpers ansvar og regning. Pakker godt.
Brukermanual: https://www.sarte-audio.com/sites/default/files/manuales/manual_rpm51.pdf
Spesifikasjoner:
Turntable:
- Quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt
- Nominal speeds 33 / 45 / 78 r.p.m. (78 optional)
- Medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones
- Motor is decoupled from the plinth to reduce vibration transmission
- The resonance-optimised platter is a sandwich construction, comprising the hub, a medium density fibre platter, a cork mat (a standard felt mat is also supplied) and a screw-down record clamp
- Tonearm bearing comprises inverted hardened stainless-steel points and sapphire thrust-pads
- Conical carbon fibre armtube allows adjustment of needle azimuth despite fixed headshell
- Vertical tracing angle adjustable
- Low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing
- Motor decoupled to reduce vibration
- Central metal block optimises centre of gravity and damps main bearing
- Gold-plated RCA phono sockets
- Plinth finished in 'anthracite' piano-lacquer finish
Tonearm:
- Pro-Ject 9cc carbon fibre tonearm installed
- The headshell and armtube are fashioned from a single piece of carbon-fibre.
- Conical armtube avoids standing wave reflections.
- Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
- Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
- Design of counterweight effectively counteracts unwanted resonances.
- Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
- Solid arm base permits accurate height adjustment of armtube and VTA (vertical tracing angle).
- Single-screw fixing of arm tube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
- Silicone-damped arm-lift can be adjusted to suit working height of the arm.
- The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
Størrelse:
Mål (BxDxH): 371 mm x 300 mm x 145 mm
Produktvekt: 6.5 kg
Tonearmlengde: 230 mm
Profilinformasjon
Du må være logget inn for å se brukerprofiler og sende meldinger
InnloggingAnnonsens metadata
Sist endret: 19.1.2022, 17:50 ・ FINN-kode: 245318089