Bildegalleri
(1/1)
Fluke Spenningstester T5-600
Til salgs2 498 kr
Beskrivelse
Fluke T5-600 Voltage, Continuity and Current Tester The T5-600 is a versatile troubleshooting tool to carry to every job site. Use it to check voltage, continuity, and current with one compact tool. Just select volts, ohms, or current and the tester does the rest. For higher voltage applications check out the Fluke T5-1000. Automatically measure AC and DC voltage up to 600 V with precise digital resolution Auto-selects between AC and DC voltage Suitable for residential or commercial applications Measure current up to 100 A without breaking the circuit with OpenJaw? design OpenJaw? design allows for fast and easy current measurement Measure current more safely without metallic contact Troubleshoot resistance problems up to 1000 ? Measure resistance when troubleshooting motors, HVAC systems or electrical systems Built-in continuity beeper provides fast and easy go/no-go tests Work in tight spaces with detachable Slim Reach probe tips Features a compact design with handy probe storage, easily fits in one hand The test lead slot in the back makes the meter an “extended handle” for the probe, leaving the other hand free to place the second lead Test leads accept Fluke accessory test clips Key safety features Protected to EN61010-1 CAT III 600 V rating Integrated protection circuit allows it to stay connected to a voltage source longer than a solenoid tester UL and CSA approved Additional product features Withstands a 10 ft. (3 m) drop Offers Auto-off mode to conserve battery life Fits into an optional holster that attaches to a belt and neatly stows test leads
Spesifikasjoner: Fluke T5-600 Elektrisk tester
Specifications
Jaw opening 12.9 mm (0.5 in)
Max wire size 1/0 THHN Cable
Current range AC rms 0 to 100.0 A
Accuracy AC current (50/60 Hz) 3% 3 counts
AC response Averaging
Voltage range AC/DC 0 to 600 V
Voltage accuracy AC 1.5% 2 counts
DC 1% 1 count
Resistance range 0 to 1000 ?
Continuity beeper threshold On at < 25 ?, off at > 400 ?
Volts indicator LED threshold Guaranteed on by 30 V AC
Environmental Specifications
Operating temperature -10 C to 50 C
Storage temperature -30 C to 60 C
Humidity (without condensation) 0% to 95% (5 C to 30 C);
0% to 75% (30 C to 40 C);
0% to 45% (40 C to 50 C)
Dust/water resistance Yes
Operating altitude 2000 meters max
Temperature coefficient 0.1 x (specified accuracy)/ C (< 18 C or > 28 C)
Safety Specifications
Measurement Category IEC 61010-2-032, IEC61010-2-033: CAT III 600 V, 100 A ac
Agency approvals CSA, TUV
Maximum voltage 600 V between any terminal and earth ground
Mechanical and General Specifications
Size 30.5 x 51 x 203 mm
Weight 300 g
Warranty Two-years
Battery life 200 hour zinc chloride, 400 hour alkaline
Battery type 2 x AA
Low battery indicator Yes
Current sensor opening 12.9 mm
Spesifikasjoner: Fluke T5-600 Elektrisk tester
Specifications
Jaw opening 12.9 mm (0.5 in)
Max wire size 1/0 THHN Cable
Current range AC rms 0 to 100.0 A
Accuracy AC current (50/60 Hz) 3% 3 counts
AC response Averaging
Voltage range AC/DC 0 to 600 V
Voltage accuracy AC 1.5% 2 counts
DC 1% 1 count
Resistance range 0 to 1000 ?
Continuity beeper threshold On at < 25 ?, off at > 400 ?
Volts indicator LED threshold Guaranteed on by 30 V AC
Environmental Specifications
Operating temperature -10 C to 50 C
Storage temperature -30 C to 60 C
Humidity (without condensation) 0% to 95% (5 C to 30 C);
0% to 75% (30 C to 40 C);
0% to 45% (40 C to 50 C)
Dust/water resistance Yes
Operating altitude 2000 meters max
Temperature coefficient 0.1 x (specified accuracy)/ C (< 18 C or > 28 C)
Safety Specifications
Measurement Category IEC 61010-2-032, IEC61010-2-033: CAT III 600 V, 100 A ac
Agency approvals CSA, TUV
Maximum voltage 600 V between any terminal and earth ground
Mechanical and General Specifications
Size 30.5 x 51 x 203 mm
Weight 300 g
Warranty Two-years
Battery life 200 hour zinc chloride, 400 hour alkaline
Battery type 2 x AA
Low battery indicator Yes
Current sensor opening 12.9 mm
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Nøkkelinfo
- Tilstand
- Ny
Generell info
Velkommen til Tool Depot AS Avd Jegard. Alt innen verktøy, festemidler, arbeidsklær og alt annet du skulle trenge til byggeplassen. Vi er din lokale forhandler av Gaupen Tilhengere og har eget serviceverksted. Vi har også serviceverksted for alt av elektroverktøy, redskaper og hagemaskiner. Vi holder sentralt til i Nils Hansens Vei 2A, 0666 Oslo. Stor gratis parkering og en innholdsrik forretning over 2 etasjer. Velkommen til oss!
Beliggenhet
FINN-kode | 221634411 |
---|---|
Sist endret | 26.3.2024, 09:20 |