Bildegalleri
Tactrix OpenPort 2.0 OBD interface diagnose/tuning
Beskrivelse av varen
Selger en helt ny Tactrix Openport 2.0 OBD interface.
Orginal, kjøpt direkte fra Tactrix, 8 gen Kina-kopi!
Brukes som J2534 passthrough for diverse diagnoseprogrammer og tuningprogrammer. Se under for info fra produsenten. Også masse info på diverse forum rundt på nett. Har brukt den selv bl.a med Forscan for Ford.
Følger også med en spesiell Mitsubishi overgangskabel.
The OpenPort 2.0 is our newest tuning tool hardware that is capable of communicating with most OBDII compliant vehicles using a standard J2534 interface. Combined with our EcuFlash software, the OpenPort 2.0 is capable of reflashing a large number of vehicles.
We include a USB cable with each OpenPort, which is all the hardware you'll need unless you have one of the few vehicles that require a separate reflash adapter.
Technical Details
72Mhz 32-bit processor
USB 2.0 full speed device (USB-A/Mini cable included)
Field upgradeable software
Supports these major OBD protocols:
CAN 2.0 (CAN/ISO15765)
K-line (ISO9141/ISO14230(KWP2000)/dual K line)
J2534 PassThru support with Windows DLL
Standalone datalogs to microSD / microSDHC card without a laptop
Able to apply GND or 5V-25V to OBD pins 1,3,9,11,12,13 or AUX 2.5mm stereo connector
Able to log from Innovate Motorsports 2.5mm stereo MTS data bus
RGB status LEDs
Profilinformasjon
Du må være logget inn for å se brukerprofiler og sende meldinger
InnloggingAnnonsens metadata
Sist endret: 28.6.2021, 07:01 ・ FINN-kode: 214636390