Bildegalleri
Technics SL 1200 GR
Beskrivelse av varen
Type: Platespillere
Testinnspilling av spilleren som her selges:
https://youtu.be/-9bnZFlxqig
Audio Appraisal skriver om denne spilleren:
"At this price, the Technics SL-1200GR is an outstanding piece of engineering with performance that wouldn’t be embarrassed by alternatives at many times it moderate cost. In typical Japanese form it is built to a standard better than most, and feels every bit the piece of quality engineering that it is. It offers exemplary technical performance, has musicality in spades and offers simply outstanding value for money. If this were a boutique British-manufactured deck, it would sell for many times its asking price and by default be revered by the masses. As it is it is one of the few genuine bargains in hi-fi audio. My only hope is that it doesn’t slip under the radar, as it is a piece that deserves to be heard. And now, as I conclude this writing, I am off to do just that."
Les hele omtalen her:
https://www.audioappraisal.com/technics-sl-1200gr-sl-1210gr-turntable-review/
Spilleren som selges her ble kjøpt ny i august 2020. Perfekt i utseende og lyd.
Jeg har tatt vare på original emballasje - pakker godt med ekstra lag utenpå for å beskytte emballasjen. Jeg sender til hele landet for kr270,-.
Produsentens egen omtale av spilleren:
"Coreless Direct-Drive Motor Achieving Stable Rotation
Unlike belt-drive and other systems, direct-drive systems rotate the motor at low speed and directly drive the platter. This concept provides numerous advantages, such as the almost complete absence of degradation in S/N ratio due to motor vibration and deceleration mechanisms, as well as high reliability over a long period of time because of not requiring parts replacement.
In 2016, Technics developed the twin-rotor, surface-facing, coreless direct-drive motor with rotor magnets placed on both sides, eliminating the rotation irregularity of the motor, referred to as "cogging," which was a unique issue for direct-drive systems. This motor was adopted for the SL-1200G, which once again drew a significant response in the hi-fi market. The SL-1200GR inherits the same design philosophy with the new development of a single-rotor, surface-facing, coreless direct-drive motor, resulting in the elimination of cogging.
The SL-1200GR’s rotation control, which verifies and corrects the precision of the motor, uses the latest motor control technology cultivated in the development of Blu-ray devices, just as that used by the SL-1200G. In addition, the electrical circuitry has been tuned to ensure the newly developed motor of the SL-1200GR achieves maximum performance.
Turntable Platter —Pursuing Rigidity and Vibration Damping Characteristics
The platter achieves high-rigidity and vibration-damping characteristics by using a two-layer construction with deadening rubber applied to the entire rear surface of the aluminum die-cast. This eliminates the unnecessary resonance that is otherwise relayed to the record, thereby producing clear sound.
To increase the inertial mass and to reduce vibration, the shape of the aluminum die-cast portion was optimised by simulation. At 2.5kg (including the rubber mat), the SL-1200GR platter is 0.8kg heavier than that of the previous SL-1200MK5. Also, the back surface of the platter features strengthening ribs to improve rigidity. Increasing the surface area of contact with the deadening rubber achieves damping characteristics that are more than twice as good as those of the SL-1200MK5.
Tonearm Achieving High Initial-Motion Sensitivity
The tonearm tracks the rotation of the record and enables reading with high precision. The tonearm inherited by Technics is the traditionally used static-balance universal S-shaped tonearm, employing an aluminum pipe with excellent light weight and rigidity for the material of the tonearm pipe.
With its gimbal suspension construction, the tonearm bearing section of the SL-1200GR uses a cut-processed housing that employs high-precision bearings, as in the SL-1200G. The high initial-motion sensitivity of 5mg or less is achieved through manual assembly and adjustment by skilled Japanese artisans. This enables the grooves etched into the records to be accurately traced.
Gold-plated phono terminals and ground terminals for detachable cables are provided below the tonearm, so a wide variety of cables can be selected. Also, the use of metal shielding construction inside the case reduces the effects of external noise.
High-rigidity Body and High-damping Silicon Insulators for Beautiful Sound and Isolation from Various Vibrations
The SL-1200GR ensures high-rigidity by using a body with a two-layered construction solidly unifying the BMC and the aluminum die-cast chassis.
For the insulators supporting the body, as with the SL-1200G, the SL-1200GR uses special silicon rubber that ensures both high vibration damping characteristics and long-term reliability. Vibration in the horizontal direction is absorbed by reinforcement with cylindrical tubes using microcell polymers. While inheriting the technology of the SL-1200G, the insulators have been modified to specifically suit the characteristics of the SL-1200GR."
Tekniske data:
Technology for Rotational Stability
Coreless Direct Drive Motor
High-Precision Motor Controller
Construction for Vibration Tolerance
High-dampening Turntable Platter
Rigid Cabinet Construction
Silicon Rubber Insulator
High Quality Parts
High Sensitive Tonearm
Gold--plated Detachable Terminals
Technics Definitive Design
Inherited SL-1200 Series
Turntable Section:
Type: Direct Drive Manual Turntable
Turntable Speeds: 33 1/3, 45, 78 r/min
Adjust Range: ±8%, ±16%
Starting Torque: 2.2 kg・cm
Build-up Characteristics: 0.7 s. from standstill to 33 1/3 r/min
Wow and Flutter: 0.025% W.R.M.S.
Rumble: 78dB (IEC 98A Weighted)
Turntable Platter: Aluminum die-cast
Diameter:332mm
Weight:Approx. 2.5kg (Including rubber sheet)
Tonearm Section:
Type: Universal, Static Balance
Effective Length: 230mm • Overhang: 15mm
Tracking Error Angle:
Within 2° 32' (at the outer groove of 30cm record)
Within 0° 32' (at the inner groove of 30cm record)
Offset Angle: 22°
Arm Height Adjustment Range: 0 - 6mm
Stylus Pressure Adjustment Range: 0 - 4g (Direct Reading)
Head Shell Weight: Approx. 7.6g
Applicable Cartridge Weight Range:
[without auxiliary weight] 5.6 - 12.0g (14.3 - 20.7g (including head shell))
[with auxiliary weight] 10.0 - 16.4g (18.7 - 25.1g (including head shell))
Cartridge Mounting Dimension: JIS 12.7mm, interval • Head Shell Terminal Lug: 1.2mmφ 4-pin terminal lug
Terminals:
Audio Output: PHONO (Pin Jack) x 1, EARTH TERMINAL x 1
General:
Dimensions (W x H x D): 453 x 173 x 372 mm
Weight: Approx. 11.2kg
Profilinformasjon
Du må være logget inn for å se brukerprofiler og sende meldinger
InnloggingLånepriser
Eff.rente 11,00 %. 120 000 o/5 år. Kostnad: 34 341 kr. Totalt 154 341 kr.
Annonsens metadata
Sist endret: 14.4.2021, 13:29 ・ FINN-kode: 211900777