Bildegalleri
RAT Valve amps Dummy load
Beskrivelse av varen
Tilstand: Brukt
Gitartype: Gitarutstyr
Selger en RAT valve dummy load boks.
Info her; https://www.ratvalveamps.com/dummy-load
Klippet og limt fra produsenten.
If your Amp is not fitted with 'Headphone'-or-'Line-Out' Sockets - This Box will solve your Problems.
All Valve Amplifiers must have a 'Load' at the Output, usually this is a Speaker. If a Valve Amplifier is used without a Load, it will rapidly destroy the Output Valve/s, Output Transformer or Both. The RAT 'VALVE AMP SPEAKER LOAD' Box is designed to REPLACE the Speaker and allows you to use your Amp with standard Stereo 'Headphones'. It also offers a 'Line-Out' for connection to a Slave Amp, Mixer or Recording Equipment (DAW). There are independent 'Level' (Hi-Lo) switches to set the 'Headphone' and 'Line-Out' Volume. If you wish to use your Amp as normal (with the Main Speaker active) you can still use the 'Headphone' -and- 'Line-Out' Sockets.
Also, a lot of 'Balanced/Emulated' Direct Injection (DI) Boxes use a 'Feed-Through' System where you connect your Valve Amp Speaker Output to the 'DI' Box, then connect the 'DI' Box back to your Speaker. The RAT Dummy Load will REPLACE the Speaker allowing the 'DI' Box to be used Silently (NO Speaker Connected). If you are not interested in a 'Balanced/Emulated' Output, then the RAT Dummy Load can be used as the main 'DI' Box.
The RAT Dummy Load Box can also be used as a 'PSEUDO FX LOOP' - allowing Time Based Effects (Delay, Echo, and Reverb) to be Sent to a 2nd Amplifier.
The 'LINE-OUT' is 'RAW' - NO Speaker Emulation. This gives the True Sound of your Amp. Most DAW (Digital Audio Workstation) Software has Multiple Speaker Emulation settings.
The 'HEADPHONE' output is Stereo (2x Mono) and Frequency Corrected (Reduced Bass). Works with All Stereo Headphones.
Kan sendes på kjøpers regning.
Profilinformasjon
Du må være logget inn for å se brukerprofiler og sende meldinger
InnloggingAnnonsens metadata
Sist endret: 24.4.2019, 13:37 ・ FINN-kode: 145521084