Bildegalleri
(1/24)
DIV Hydrauliske 1/14 maskiner til salgs
Til salgs
Fiks ferdig
14 490 kr
Frakt fra 319 kr + Trygg betaling 248 kr
Trygg handel med Fiks ferdig
Varen sendes til deg, og du har 24 timer til å inspisere den før pengene overføres til selgeren.
Beskrivelse av varen
Tilstand: Som ny - Ikke synlig brukt
1/14 Komatsu WA470 Hjullaster, Volvo EC4800L Gravemaskin, CAT D9T bulldoser, Trommel og transportbånd selges rimelig.
Alt er som nytt, dette er kun testet av meg.
Kan selges samlet, eller separat.
Kom gjerne med bud ved kjøp av alt samlet.
Useriøse henvendelser svares ikke.
For spec og priser les videre:
Caterpillar D9T 1/14 Hydraulic Bulldoser
Ny pris med levering til norge ink frakt, mva og toll: kr 42.500
Selges med 40% = 25.500
Installert lyd og lys
Specifications:
• Alloy Zinc and Alloy Aluminum Casting (except Track and Hydraulic Pump)
• Weld Steel Bucket
• 9 Channel 2.4GHZ Radio
• Heavy Duty Hoses (OD 3.2mm Nylon, ID 2.2mm)
• Main Heavy Duty Hoses (OD 4mm Nylon, ID 2.5mm)
• Optimized Steel Hydraulic System
• Reliable Hydraulic Valve and Adjustable Pump
• Brushless Hydraulic System
• Lipo Cutoff
• Full Metal Scale
• All Terrain Metal Crawler
• 540 Brushed Monster Torque Motor
• Full Metal Transmission (1:256 Gear Ratio)
• Run Time is: 38 Minutes (5300mAh Battery)
• Chrome Steel Oil Pump (47.5mm x 35mm x 36mm)
• Bucket Capacity: 494949 mm³
• Maximum Bucket Force (Down): 76kg / 167pounds
• Maximum Bucket Force (Up): 50kg / 110pounds
• Maximum Bucket Force (Thrust): 50kg / 110pounds
• Driving Speed: 408 Meter Per hour
• Scale: 1:14
• Length: 27in / 685mm
• Width: 13.8in / 351mm
• Height: 12.7in / 323mm
• Bucket Height: 6.87in / 174.6mm
• Maximum Bucket Up and Down Angle: 29 degrees
• Maximum Bucket Tilt Angle (Left and Right): 9 degrees
• Maximum Ripper Depth of the Ground: 1.97in / 50mm
• Total Mass Load: 37kg / 82LBs
• Operating Oil Pressure: 25Bar, 362.5psi
• Dead Weight: 26kg / 57LBs
Volvo EC4800l 1/14 RTR Hydraulic Excavator
Ekstra utstyr:
- Driving Cab Stone Guard
- Light System
- Sound Module
- Wide Bucket For
- Narrow Bucket
- Quick Change Ripper
- Rock Bucket
- Volvo Decal Sheet Set
Totalt for Graver og ekstra utstyr: Kr 53.900
Selges med 40% avslag kr 32.340
Specifications:
• Alloy Zinc and Alloy Aluminum Casting (except Hydraulic Pump)
• Custom 8 Channel 2.4Ghz Radio
• Preinstalled High Intensity Light Sockets (Wire and bulbs are not included)
• Optimized Steel Hydraulic System
• Scale Driving Figure Ready (Not included)
• Alloy Zinc Molded Tracks (50mm Width)
• Efficient Undercarriage
• Reliable Hydraulic Valve and Adjustable Pump
• Heavy Duty Hoses (OD 4.5mm Nylon, ID 2.5mm)
• Undercarriage May Rotate 360 Degrees (Endless)
• Powder-coated in Yellow and Grey
• Massive Brushless System (Including driving and turning)
• Hydraulic System 60A Brushless ESC, Driving and Turning System 30A Brushless ESC
• 270Kv Brushless Monster Torque Motor, Shaft dia. 3.0mm
• XT60 Power Plug Female
• Run Time: 20 Minutes based on 4200mAh, 11.1V Battery
• Steel Machined Oil Pump (60mm x 60mm x 93mm)
• Digging Force: 15kg / 33lbs
• Max Lifting Force: 70Kg / 154lbs
• Driving Speed: 360 Meter per hour
• Lipo Cutoff
• Scale: 1:14
• Length: 823mm / 32.4in
• Width: 234mm / 9.21in
• Height: 260mm / 10.2in
• Operating Oil Pressure: 2.5Mpa
• Inside Cab Length: 4.72in / 120mm
• Inside Cab Width: 2.55in / 65mm
• Inside Cab Height: 4.21in / 107mm
• Deadweight: 26Kg / 57lbs
Komatsu WA470 Hjullaster 1/14 RTR
Ny pris med levering til norge ink frakt, mva og toll var kr 42.750
Selges med 40% avslag: 25.650
Med lyd, lys, ekstra frontgaffel og figur.
• Material: steel, zinc alloy and plastic
• Custom 9 channel 2.4Ghz radio
• Optimized steel hydraulic system
• Efficient under carriage
• Scale operator station (with driving figure)
• Diecast zinc alloy Axles
• Reliable hydraulic valve and adjustable pump
• Engine sound module equipped
• Light System Installed
• Max undercarriage steering 38 degrees
• Hydraulic steering system
• Brushless driving system
• Brandnew driving mode with differential
• Battery: Lipo 3S,5200mAh,11.1V,XT60(136x45x35mm) not include
• Steel machined hydraulic gear pump
• Scale: 1:14
• Length: 720mm
• Width: 255mm
• Height: 275kg
• Weight: 20kg
RC Trommel V3 1/14 Full og 1/14 Conveyor
Ny pris med levering til norge ink frakt, mva og toll var kr 24.150
Selges med 40% avslag: 14.490
Trommel:
Specifications
Length 100 cm
Width 40 cm
Height 58 cm
Operating voltage: 12VDC
Complete paint
Conveyor:
Length 115cm
width 10cm
Working height 35cm
Includes battery compartment and on / off switch, 100% metal and CNC
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 14.6.2026 kl. 18:14 ・ FINN-kode: 467004192
Gratis frakt på kjoler til dame til og med 14. juni
Ta en titt
