Fiks ferdig
Bildegalleri
(1/5)
Crestron HD-DA4-4KZ-E - Fordelingsforsterker
Til salgs
Fiks ferdig
2 499 kr
Frakt fra 45 kr + Trygg betaling 161 kr
Trygg handel med Fiks ferdig
Varen sendes til deg, og du har 24 timer til å inspisere den før pengene overføres til selgeren.
Beskrivelse av varen
Tilstand: Som ny - Ikke synlig brukt
1:4 HDMI® Distribution Amplifier w/4K60 4:4:4 & HDR Support
> Splits one HDMI® source to four outputs
> Handles 4K60 4:4:4 and HDR video signals [1]
> Fully compatible with HD 1080p, UHD 4K, and DCI 4K sources
and displays
> Handles 3D video and Deep Color
> Handles Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and
uncompressed 7.1 linear PCM audio
> Selectable handling of HDCP 2.2 or HDCP 1.4
> EDID management options
> Input and output video presence indication
> No programming or control system required
> Thin profile – less than one inch deep
> Surface, shelf, or single rack rail mountable
> External 100-240V universal power pack included
The Crestron® HD-DA4-4KZ-E is a simple to use, high-performance 4K
AV distribution amplifier designed to split a single HDMI® signal to feed
up to four separate displays, switchers, and/or other devices. It provides
full support for UHD and DCI 4K60 4:4:4 and HDR video, HDCP 1.4 or 2.2
copy protection, and high-bitrate 7.1 audio, to ensure optimal performance
and compatibility for any HD or 4K video application. No programming or
control system is required for operation.[1]
For smaller or larger applications, refer to models HD-DA2-4KZ-E
and HD-DA8-4KZ-E.
SPECIFICATIONS
Video
Input Signal Type: HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4 support [1]
(DVI & Dual-Mode DisplayPort compatible [2])
Output Signal Type: HDMI w/HDR10, Deep Color, 3D, & 4K60 4:4:4
support [1] (DVI compatible [2])
Copy Protection: Selectable for HDCP 2.2, HDCP 1.4, or HDCP disabled
Maximum Resolutions:
4096x2160 DCI 4K
&
3840x2160 4K UHD
24 Hz 4:4:4 36 bit
30 Hz 4:4:4 36 bit
60 Hz 4:2:2 36 bit
60 Hz 4:4:4 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD1080p 60 Hz 4:4:4 36 bit
Interlaced 1920x1080 HD1080i 30 Hz 4:4:4 36 bit
NOTE: Common resolutions are shown; other resolutions are supported at
pixel clock rates up to 600 MHz
Audio
Input Signal Type: HDMI (Dual-Mode DisplayPort compatible [2])
Output Signal Type: HDMI
Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD,
Dolby Atmos, DTS®, DTS-ES, DTS 96/24, DTS HD High Res, DTS HD Master
Audio, DTS:X, LPCM up to 8 channels
Communications
USB: USB 2.0 host; supports firmware update and custom EDID upload
via a USB flash drive
HDMI: HDCP & EDID (does not pass CEC)
HDCP Version: Selectable for HDCP 2.2, 1.4, or OFF;
HDCP encrypted content is blanked in OFF mode
EDID Mode: Selectable for DEFAULT or COPY 1ST;
• The factory default EDID is 4K60 4:4:4 non-HDR video with
2-channel LPCM audio;
• The factory default EDID can be replaced with a custom EDID
via USB;
• Sliding the switch from DEFAULT to COPY 1ST copies and stores
the EDID from the device at OUTPUT 1 and passes it to the INPUT
source device;
• Sliding the switch from COPY 1ST to DEFAULT erases the stored
EDID and uses the factory default or custom EDID;
Note: Changing the device at OUTPUT 1 will not update the stored
EDID until the switch is moved to DEFAULT and back to COPY 1ST
Connectors
INPUT: (1) HDMI Type A connector, female;
HDMI digital video/audio input [1];
(DVI & Dual-Mode DisplayPort compatible [2])
OUTPUT 1 – 4: (4) HDMI Type A connectors, female;
HDMI digital video/audio outputs [1];
(DVI compatible [2])
SERVICE: (1) USB Type A connector, female;
USB 2.0 host port;
For firmware update and custom EDID upload via a USB flash drive
NB: Knappen for å vise hele beskrivelsen har kun en visuell effekt.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 17.1.2026 kl. 22:30 ・ FINN-kode: 446633777
