Bildegalleri
Accusump Universal Kit for Porsche 987 Cayman / Boxster / 997 / 996
Til salgs
Frakt fra 179 kr + Trygg betaling 220 kr
Trygg handel med Fiks ferdig
Varen sendes til deg, og du har 24 timer til å inspisere den før pengene overføres til selgeren.
Beskrivelse av varen
Tilstand: Helt ny - Uåpnet/med lapp
Bilmerke: Porsche
LN Engineering HPDE 2 Quart Accusump Universal Kit forhindrer oljetrykk fall i høy G i sving på bane / trackday.
Pris fra Pelican parts: Kr. 21.500,- (USD$ 1,750,- ) + Frakt fra USA.
https://www.pelicanparts.com/More_Info/LN106121.htm?pn=LN-106-12-1&srsltid=AfmBOoratLrExjBB2nTvS-l_2cjFqAPhJACSgQbjc6lpWqffsZ9AE9Wf
The Accusump is the original automotive oil accumulator used to prevent oil starvation. The Accusump is connected to the pressure side of an engine's oiling system and is charged by the engines own oil pump. Its simple, efficient design revolves around a hydraulic piston separating an air pre-charge side and an oil reservoir side. On the oil side of the Accusump it has an outlet that goes into the engine's oiling system, controlled by a valve.
The Accusump is designed collect pressurized oil from your engine and store it so it may be discharged later during low oil pressure surges to protect against engine damage during demanding racing conditions. After the oil pressure stabilizes, the piston inside the Accusump moves back and forth, pressurizing the Accusump until it equalizes with engine's oil pressure. The Electric Pressure Control Valve we use is for a discharge/refill of 35-40 PSI. These valves have the convenience of an electric valve for remote mounted units on daily drivers but with the rapid refill rate of a manual valve as required in racing. The E.P.C. valving will only allow the Accusump to discharge oil when the engine’s oil pressure drops below a predetermined level and only refill when the pressure rises above that level.
The Bilt Racing HPDE Accusump kit is easy to install, requiring plumbing of only a single oil line. Our universal Accusump kit has everything you need to carry out a custom Accusump installation in your Boxster, Cayman, or 911, sans wiring or electrical pieces and includes:
Two quart Marine Accusump system
LN Engineering's Spin-On Full-Flow Oil Filter Adapter
Custom single input sandwich adapter (for easy one-line installation - fits standard 106-01 Spin On Oil Filter Adapter set up to accept a filter with 13/16-16 thread
45 psi electronic valve, hose, and fittings
Please note: Oil filter will sit approximately 1" lower than in the factory configuration. In conjunction with the installation of an Accusump, we recommend adding an X51 oil baffle and 997 oil return tubes for improved oil control and ensure scavenge oil is returned to the sump as quickly as possible and Driven XP9 Racing Oil; A sump guard is highly recommended.
Alternatively, a two quart deep sump, part number 106-00.1 can be used to address oil starvation concerns in M96 and M97 engines which includes an X-51 style baffle, 997 oil return tubes, and anti-slosh tray for optimal oil control.
Brukerprofil
Du må være logget inn for å se brukerprofiler og sende meldinger.
Logg innAnnonsens metadata
Sist endret: 25.11.2025 kl. 09:46 ・ FINN-kode: 424910563



